Repair of spindles and motor spindles fitted with NTN-SNR bearings
Brochexpress is an independent workshop specialising in the repair, maintenance and diagnosis of spindles and motor spindles fitted with NTN-SNR bearings — a French-Japanese alliance pairing NTN technology with SNR's long-standing French expertise, through the Ultage super precision range.
NTN-SNR, Japanese engineering paired with French expertise
TLDR: NTN-SNR Roulements pairs the Japanese technology of the NTN group with SNR's long-standing French expertise. The range covers over 10,000 active machine tool references, including the Ultage super precision family designed for spindles.
NTN-SNR Roulements pairs the Japanese technology of the NTN group with SNR's long-standing French expertise, offering a full range of high-precision bearings for the machine tool industry. The NTN Ultage super precision range — a name formed from "Ultimate" and "Stage" — gathers the group's standardised NTN-SNR spindle bearings, with a compromise between speed, load capacity and precision optimised as standard.
Alongside it, the SNR MachLine high-precision range, historically dedicated to machine tool spindle bearings, answers the most demanding needs in precision, stiffness, speed and integrated sealing. The group invests continuously: in 2015 it presented an Air Cooling Spacer system raising the permissible rotational speed of its spindle bearings by 50 %.
One distinction worth making at diagnosis time: NTN-SNR does not manufacture spindles. A spindle fitted with NTN-SNR bearings remains a spindle from its own builder. For the role of the component itself, see our page on spindle bearings.
An Ultage range with specialised cages, for every speed band
TLDR: Ultage bearings come with several cage technologies — T1 for maximum limiting speed, T2 for reduced heat generation, T6 for cylindrical rollers, T9 for ultra high speed. Hybrid ceramic versions gain 30 % speed, 10 % stiffness and up to three times the service life.
The T1 cage, in phenolic resin, equips high-speed angular contact ball bearings able to reach maximum limiting speeds. The T2 cage, in polyamide resin, reduces heat generation on precision angular contact bearings for machine tools, which allows higher speeds. The T6 cage, in light and robust PEEK, is designed for cylindrical roller spindle bearings, with a grease retention design that limits heating. The T9 cage, NTN's latest development, pushes performance further at lower cost.
Hybrid ceramic ball versions of this range raise speed by 30 %, stiffness by 10 %, and triple the service life against equivalent all-steel versions. These super precision angular contact bearings cover bores from 10 to 130 mm, with contact angles of 15° and 25° depending on the application.
Spindles and motor spindles fitted with NTN-SNR bearings we cover (non-exhaustive)
- Main spindles fitted with Ultage super precision angular contact bearings
- SNR MachLine high-precision machine tool spindle bearings
- Hybrid ceramic ball bearings, with significant speed and life gains
- NTN-SNR motor spindle bearings for ultra high speed, T6 and T9 cages
- NTN-SNR bearings integrated into third-party spindles
Interfaces and specifications
The NTN-SNR spindle bearings we use in our repairs cover the Ultage ranges, high and ultra high speed, and SNR MachLine, for bores typically from 10 to 130 mm — exact references selected according to the original specification of your equipment.
The NTN-SNR motor spindle bearings most often seen in the workshop are the T2 cage units and the hybrid ceramics, both built for higher speeds. An NTN-SNR spindle bearing is never picked from a catalogue: the original specification, the service speed and the lubrication method determine the reference.
Our expertise on spindles and motor spindles fitted with NTN-SNR bearings
TLDR: Brochexpress works across the whole life cycle of your spindles fitted with NTN-SNR bearings, with the same rigour as on every other component in our portfolio.
On-site customer service
- Diagnosis and intervention directly on your machine, in your production workshop, to limit downtime caused by spindle bearing wear.
Full diagnosis
- Checks on clearances, balancing, the condition of the angular contact bearings and lubrication, with a detailed technical report.
Preventive and corrective maintenance
- A maintenance programme matched to your production rate, with preventive bearing replacement ahead of full failure, plus corrective work when a breakdown occurs.
Overhaul and refurbishment
- Bearings replaced with NTN-SNR references equivalent to or above the original, seals renewed and a rotation test in the workshop, restoring the builder's original tolerances.
Why choose Brochexpress for spindles and motor spindles fitted with NTN-SNR bearings
- An independent workshop, with no capital ties to the manufacturers, ensuring an objective diagnosis
- Expertise on the Ultage and MachLine ranges, specialised cages and hybrid ceramics
- Two service sites: Beaurepaire (France) and Lussery-Villars (Switzerland)
- Support from the first intervention through to return to production
Turnaround and warranty
- On-site service within 48 hours
- Workshop repair: around 20 working days, subject to parts availability
- 12-month warranty on all our repairs
Frequently asked questions
What is the difference between the T1, T2, T6 and T9 cages in NTN-SNR bearings?
Each cage type is optimised for a different application: maximum limiting speed for the T1, reduced heat generation for the T2, cylindrical rollers for the T6, ultra high speed for the T9. We select the reference matched to what your spindle actually needs.
Does an NTN-SNR hybrid ceramic bearing always justify its extra cost?
Not automatically. The gain in speed, stiffness and service life is real, but it only pays off if the application genuinely works in those performance ranges.
Do you work on legacy SNR MachLine bearings?
Yes. We diagnose and repair these spindles whatever the age of the reference fitted.
What is the average lead time for a spindle bearing replacement?
Allow around 20 working days in the workshop, depending on the condition of the spindle and the availability of the references.
Do you offer a preventive maintenance contract covering scheduled bearing replacement?
Yes, we set up preventive maintenance programmes matched to your production rate.
A reliable partner for your industrial performance
Whether it is an emergency callout, a full workshop overhaul or a preventive maintenance programme, Brochexpress puts its expertise at the service of your production. As an independent workshop, we work on spindles and motor spindles fitted with NTN-SNR bearings, whatever the machine brand.
Our teams are available from our sites in Beaurepaire (France) and Lussery-Villars (Switzerland) for a needs assessment, a diagnosis or a tailored quotation.
Request a quoteRelated services
NTN-SNR® is a registered trademark of NTN-SNR Roulements. Brochexpress is neither affiliated with, nor a partner of, nor an authorised distributor for NTN-SNR. Our activity is the independent repair and maintenance of industrial equipment, permitted as referential use of a trademark.